Skip to main content

Validation Commands

After deployment, verify each node is accessible and correctly configured.

SSH Access

ssh ubuntu@10.0.0.2   # set-hog
ssh ubuntu@10.0.0.4   # fast-skunk
ssh ubuntu@10.0.0.7   # fast-heron

MAAS injects your SSH key automatically — no password needed.

System Check (run on each node)

hostname         # verify correct hostname
ip a             # verify IP is in 10.0.0.0/24, no IPv6
free -h          # verify ~15.9 GiB RAM
df -h            # verify ~512 GB disk

Network Connectivity Test (run from controller)

ping -c 2 10.0.0.2
ping -c 2 10.0.0.4
ping -c 2 10.0.0.7

All should respond with 0% packet loss.

Expected Final State

✔ 3 machines deployed
✔ Clean network (10.0.0.0/24)
✔ No IPv6 addresses
✔ SSH working on all nodes
✔ MAAS fully operational

SSH Access
System Check (run on each node)
Network Connectivity Test (run from controller)
Expected Final State